{"product_id":"7014-legacy-white-2","title":"7014 Legacy White 2.0","description":"\u003cp\u003eIntroducing the new and improved \u003cstrong\u003eLegacy White 2.0 7014 Plastisol Ink\u003c\/strong\u003e, a state‐of‐the‐art screen printing ink designed for outstanding performance. Engineered with a super creamy viscosity and medium body, this ink is perfect for both automatic and manual presses, ensuring ease of use and consistent results.\u003c\/p\u003e\n\u003cp\u003eKey benefits include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Pigment \u0026amp; Low Bleed:\u003c\/strong\u003e Delivers exceptional brightness and opacity while minimizing dye migration on cotton\/poly blends and most polyester substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Flashing \u0026amp; Low Tack:\u003c\/strong\u003e Designed for rapid production speeds, the ink spot dries with minimal tack, helping maintain smooth underprint adhesion when additional layers are applied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Curing:\u003c\/strong\u003e As part of the FlexCure™ line, it cures efficiently within a temperature range of 300°F to 325°F (149°C to 163°C), allowing for versatile application across different production environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Printability:\u003c\/strong\u003e With reduced squeegee pressure requirements and compatibility with finer screen meshes, Legacy White 2.0 not only saves on ink consumption but also delivers a softer finish on fabrics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhile Legacy White 2.0 is formulated to reduce bleeding, it’s important to note that it is a low-bleed ink—not a completely non-bleed formula. For optimal results, always conduct test prints and long-term fabric evaluations before full production. Additionally, stirring the ink prior to printing and after any additives are mixed will help maintain its superior rheological properties. Adjusting spot cure settings can further enhance performance by preventing over-curing and ensuring the best adhesion for subsequent print layers.\u003c\/p\u003e\n\u003cp\u003eElevate your screen printing with Legacy White 2.0 7014 Plastisol Ink and enjoy a balance of efficiency, quality, and cost savings on every print.\u003c\/p\u003e\n\u003ch3\u003eSPOT FLASHING\u003c\/h3\u003e\n\u003cp\u003eLegacy White™ 2.0 will spot dry, with a very low after flash tack. Dwell time depends on\u003cbr\u003ethe spot dryer used. In some cases, you may have to lower the heat of the spot cure\u003cbr\u003eunit because too much heat may make the ink tacky. When you spot dry, you are only\u003cbr\u003epartially fusing or gelling the surface of the ink. The ink should just dry to the touch, with\u003cbr\u003eno lift off, but not totally fused. Totally fusing the underprint white may cause inter-coat\u003cbr\u003eadhesion problems with the inks printed on top of the white ink. Final fusing or curing\u003cbr\u003eoccurs in the dryer.\u003c\/p\u003e\n\u003ch3\u003eIMPORTANT INFORMATION\u003c\/h3\u003e\n\u003cp\u003eLegacy White™ is a low bleed ink, not a non-bleed ink. On some types of fabric, bleeding\u003cbr\u003eor dye migration may occur. Always test print the fabric to be printed before beginning\u003cbr\u003eproduction. It is best to do some long-term testing on fabrics to determine if they are\u003cbr\u003egoing to bleed. Bleeding or dye migration may not occur right away.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eLegacy White™ 2.0 was formulated to make printing opaque white easy. Hand printing is\u003cbr\u003eless tiring because less squeegee pressure is needed. The result is an improved operator\u003cbr\u003eperformance due to superior ink rheology. Automatic equipment can be adjusted to\u003cbr\u003elower pressure settings, thus improving screen life, squeegee durability and overall print\u003cbr\u003equality.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eLegacy White™ 2.0, compared to other opaque whites, prints more easily. You will find\u003cbr\u003ethat a finer screen mesh can be used to achieve the same opacity as a more open mesh.\u003cbr\u003eThis means less ink will be needed, a real money saver in terms of ink usage. It also\u003cbr\u003emeans a softer hand on flashed or finished fabrics.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAdding any reducers or additives can lower bleed resistance, reduce opacity, or increase\u003cbr\u003ecure times of ink. STIR the ink prior to printing on press and after the addition of reducers\u003cbr\u003eor additives.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eTest dryer temperatures and wash test printed product before and during a production\u003cbr\u003erun.\u003c\/p\u003e","brand":"International Coatings","offers":[{"title":"Quart","offer_id":50934291759378,"sku":"IC7014203","price":47.2,"currency_code":"USD","in_stock":true},{"title":"Gallon","offer_id":50934291792146,"sku":"IC7014204","price":95.84,"currency_code":"USD","in_stock":true},{"title":"5 Gallon","offer_id":50934291824914,"sku":"IC7014205","price":425.0,"currency_code":"USD","in_stock":true},{"title":"28 Gallon","offer_id":50934291857682,"sku":"IC7014228","price":2400.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/0062\/2098\/files\/7014-legacy-white-20-610950.jpg?v=1739223565","url":"https:\/\/mclogasale.com\/products\/7014-legacy-white-2","provider":"McLogan Supply","version":"1.0","type":"link"}